Throttle Tamer

This refers to Ducati Scrambler dunno why it's posted here! Can't change it

"Tamer" arrived today took only 20 minutes to fit most of that was taking off the grip from old throttle and putting on the new one!
Fired up to check movement and adjust noticed the difference even then. Will be using the bike tomorrow for work, heavy rush hour traffic should tell me and show the difference easily.

Didn't have a part number but just

Ducati G2 Ergonomic Throttle Tamer

Fitting:

To remove

Two crosshead screws
Two 8mm bolts
Barend plug Allen bolt

Seperate the casing carefully release the cable from old throttle slide old one off.
Replace with the new noting how it fits into the casing.
Refit the casing loosely with the 8mm bolts first .
Taking care to correctly align the cable in the cover before screwing it back on.
Then have fun putting the grip on!
If you need pictures get someone else to do it!
Seriously it's not rocket science it's about making sure it rolls on and off smoothly no snagging or roughness in movement. YOUR LIFE DEPENDS ON IT!
If you are in anyway worried get a professional to fit it.
You Tube has several videos on it as well.